Standard 11 Surface Mining Induction
Description
The Standard 11 mining induction is the mandatory entry requirement for anyone commencing work on a Queensland coal mine site. This mining induction training applies to direct employees and contractors alike, covering the core safety and operational knowledge required before you set foot on site. Whether you are entering the industry for the first time or transitioning from another sector, our mining induction programs are designed to get you compliant and work-ready. The standard 11 induction covers the statutory requirements for surface coal operations in Queensland, and completing it earns you a nationally recognised standard 11 coal induction statement of attainment.
This standard 11 surface induction meets Queensland’s legislative requirements under the Coal Mining Safety and Health Act and is accepted across Queensland coal mine sites. We have been delivering standard 11 mining induction Queensland training for 35 years, with a track record that spans thousands of workers across the coal sector. Our trainers bring direct industry experience to every session, giving you practical context alongside the required content. We deliver this s11 coal mine induction and standard 11 generic mining induction across three Queensland locations, keeping access realistic regardless of where you are based.
Entry Requirements, Topics, Units & Delivery
Standard 11 Induction is suitable for new entrants and those transitioning to surface mining roles. Bring government photo ID, your USI, and wear long sleeves, long pants, and steel-cap boots. Basic LLN skills are required, and participants must be fit for practical tasks.
If you need LLN support or reasonable adjustment, our team can assist.
Topics covered:
- Hazard identification and local risk control
- WHS duties & fitness for work
- Site work processes, permits & documentation
- Communication in surface operations
- Initial response to emergencies and incidents
- How S11 links to site-specific inductions
Units of Competency (6 units):
- RIICOM201E – Communicate in the workplace
- RIIGOV201E – Comply with site work processes/procedures
- RIIRIS201E – Conduct local risk control
- RIIERR205D – Apply initial response first aid
- RIIERR302E – Respond to local emergencies and incidents
- RIIWHS201E – Work safely and follow WHS policies and procedures
Standard 11 Induction is over two full days (7:45am–4:00pm) including classroom learning, practical activities, and assessment tasks. Public dates are available in Emerald and Brisbane (TAFE Eagle Farm), with onsite delivery available for groups.
Assessment, Certification & Compliance
Participants with relevant prior experience may receive a Statement of Attainment at the end of Day 2.
Cleanskins receive a Statement of Completion and a New Entrant Logbook which must be completed onsite and returned within 12 months (some sites require completion within 3–6 months).
Quick facts:
- Duration: 2 days (7:45am–4:00pm)
- Mode: Classroom + practical
- Locations: Emerald & Brisbane TAFE Eagle Farm
- Recognition: SoA or Completion + Logbook (depending on experience)
- Certificates: Emailed within 2–3 business days after payment & USI verification
Lennon Training (RTO 1674) issues Standard 11 Induction certification only when all competency and USI requirements are met. Students can access the fees/refunds policy, complaints & appeals procedure, and the student handbook at any time.
Duration
2 Daysdelivery mode
Theory & Practicalnationally recognised
YesWe offer other courses, see what fits your needs.
Show All CoursesNot sure which course is right for you?
That's what we're here for. Tell us your role, your location, and what mining career you're working towards. We'll point you in the right direction.
Career Opportunities After This Course
Surface Coal Miner
A surface coal miner operates equipment and carries out extraction tasks on open-cut and surface coal mine sites across Queensland. Completing the standard 11 induction is the statutory entry requirement that allows you to legally commence this role on a Queensland coal mine site.
Plant Operator (Surface)
A surface plant operator runs heavy mobile equipment including excavators, dozers, and haul trucks in surface mining environments. The standard 11 induction is required before you can operate plant on a Queensland coal mine site, regardless of your prior experience.
Mining Contractor
A mining contractor works on coal mine sites in a trade or specialist capacity, typically engaged through a principal contractor or mine operator. This standard 11 induction meets the mining contractor induction requirement that Queensland mine sites impose before contractors can access site.
General Surface Operations Worker
A general surface operations worker supports the day-to-day running of a coal mine site across roles including maintenance, logistics, and administration conducted on site. Completing the standard 11 induction is required before you can carry out any work, including non-operational roles, on a Queensland surface coal mine site.
Our Training Facilities
Mining Training in Brisbane
Our Brisbane mining training centre sits on the TAFE Queensland SkillTech campus at Eagle Farm. It’s close to the CBD with public transport and parking nearby. It’s also home to our underground training gallery, a purpose-built mine roadway replica used for self-escape training and assessment.
Address:
Building W, TAFE Campus, 776 Kingsford Smith Dr, Eagle Farm QLD 4009
Time:
Monday to Friday, 9am-5pm
Mining Training in Emerald
Our Emerald mining training centre is our head office and the original home of Lennon Training. We’ve been serving the Central Highlands mining region from this site since 1991. Local delivery for local crews, with a team that knows the area and the operations around it.
Address:
11 Kyle St, Emerald QLD 4720
Time:
Monday to Friday, 9am-5pm
Mining Training in Moranbah
Our Moranbah mining training centre is right in the Bowen Basin, close to the major coal operations in the region. Sessions are scheduled to suit mine rosters and shutdowns. Can’t come to us? We also deliver onsite at nearby mine sites.
Address:
28 Thorpe St, Moranbah QLD 4744
Time:
Monday to Friday, 9am-5pm
What Our Students Are Saying
Real feedback from mine workers who've trained with us across Queensland.
Have Questions? We're here to Help
In quis laborum quis consequat dolor anim proident tempor irure culpa excepteur incididunt culpa.What is a Standard 11 induction, and who requires it?
The term Standard 11 induction refers to the requirements of the Recognised Standard 11 “Training in coal mines” and the requirements of the Coal Mines Safety and Health Advisory Committee which states that all Coal Mine Workers must have the six or seven competencies listed from the RII training package.
For an Underground mine:
• RIIWHS201 Work Safely
• RIIERR205 Apply Initial First Aid
• RIIGOV201 Comply With Site Work Systems
• RIIRIS201 Conduct local Risk Assessment
• RIICOM201 Communicate in the Workplace
• RIIERR203 Escape From a Hazardous Situation Unaided
and for a Surface mine:
• RIIWHS201 Work Safely
• RIIERR205 Apply Initial First Aid
• RIIGOV201 Comply With Site Work Systems
• RIIRIS201 Conduct local Risk Assessment
• RIICOM201 Communicate in the Workplace
• RIIERR302 Respond to Local Emergencies and Incidents
This induction, which was derived from the coal mines generic induction, was a recommendation from the Moura No2 mine inquiry.
What is the difference between the Standard 11 Induction and the Standard 11 Surface and Underground combo?
This course covers surface coal operations only. If your role requires you to work in underground environments as well, you will need the combined surface and underground version of the Standard 11. Contact us before booking if you are unsure which applies to your site.
Is the Standard 11 the same as a mining contractor induction?
Yes. The Standard 11 is the qualification that satisfies the mining contractor induction requirement on Queensland coal mine sites. Regardless of how your employer or host site refers to it, the Standard 11 induction is what you need.
Does the Standard 11 induction cover both coal and metalliferous mining?
No. The Standard 11 is specific to coal mining operations in Queensland. If you are entering a metalliferous or other non-coal mine site, a different induction applies and you should confirm the requirement with your employer before booking.
How long does the Standard 11 mining induction take to complete?
The standard 11 induction course duration varies depending on delivery format. Contact us directly for current session length as this can differ across our Queensland locations.
What do I need to bring on the day?
Bring a valid photo identification document and any prior training records your employer has asked you to present. We will confirm the full requirements when you book.
Related Course
Explore mining and safety training to build skills and meet compliance. Flexible options across Queensland for certifications.
Submit Your Enquiry Today
